- 0433 990 535
- info@distinctdetails.com.au
- 1/24 Exchange Rd, Malaga WA
Abrasive blasting for heavy machinery components and commercial assets, focused on stripping coatings and preparing surfaces for the next step. Malaga based with practical scoping for industrial work.
Sandblasting is a controlled way to remove old coatings, corrosion, and buildup so surfaces are ready for repair or repainting. We scope the job to the part, condition, and end goal, with work completed in our Malaga workshop for better control.
We focus on practical surface preparation for industrial work, including heavy machinery components and fleet assets where coating removal and adhesion prep matter.
Strips paint, surface corrosion, and stubborn buildup to expose a clean base.
Creates a better surface for primers and industrial coatings when repainting is planned.
Not sure if sandblasting is the right fit? Contact us and we’ll recommend the right setup.
Best suited to heavy machinery parts and commercial assets that need coatings, corrosion, or buildup removed before repair or repainting.
Buckets, guards, brackets, and parts that need stripping before repair or coating.
Trays, frames, mounts, and commercial components where surface prep matters.
Jobs where blasting is the first step before primer and industrial painting.
When old paint, corrosion, or stubborn buildup needs a clean base to work from.
Every part is different. We scope blasting around the material, condition, and what the surface needs to be ready for next, like repair, welding, priming, or industrial painting.
Need repainting after blasting? See industrial painting.
Some jobs only need coating removal on a single part. Others require a broader prep scope for repainting or refurbishment work. We’ll confirm the material, condition, and end goal first, then quote a clear scope for blasting and any follow on steps.
Pick a focused strip or a full prep for repainting. We’ll set the scope to the part, condition, and finish you’re aiming for.
Strip paint and old coatings back to a clean base.
Remove surface corrosion and prepare for repair or coating.
Surface prep blasting before primer and industrial painting.
Brackets, guards, mounts, and smaller parts blasted to scope.
Cleanup for parts with stubborn buildup from site use.
One booking scoped across a batch of components or assets.
Sandblasting is scoped to the part and the end goal. Most jobs include:
Part assessment and scope confirmation before work starts
Abrasive blasting of agreed surfaces to remove coatings or corrosion
Attention to edges, joins, and common buildup zones where possible
Post blast cleanup to remove loose media and residue
A visual check against the agreed scope and finish
Optional follow on steps quoted separately, such as industrial painting
Quotes are based on the part size and quantity, material type, condition, and how much coating or corrosion needs to be removed. We also factor in access areas, the finish you need, and whether industrial painting is planned after blasting. The scope is clear before work starts.
Every service is backed by experience, quality products, and our satisfaction guarantee.
Clear scope, controlled conditions, and practical turnaround.
Tell us what needs blasting and what it needs to be ready for next. We’ll confirm material, condition, and scope.
We set the blasting areas, finish level, and any follow on steps like painting, then quote clearly.
Parts are booked into the workshop, blasted to scope, then reviewed with you before collection or next stage.
In Perth, commercial equipment and heavy machinery parts often face harsh use, dust, and exposure that breaks down coatings over time. Sandblasting removes old paint, corrosion, and contamination so surfaces are properly prepared for repair or repainting.
Malaga based, servicing Perth metro depots and worksites.
Workshop based in Malaga, serving Perth metro businesses for heavy machinery parts and commercial components.
Popular areas we cover include Malaga, Balcatta, Osborne Park, Wangara, Bassendean, Morley, Midland, Ellenbrook, Wanneroo, and Joondalup, plus surrounding suburbs.
Outside metro or multiple depots? Get in touch and we will confirm your options.
Abrasive blasting needs a controlled setup. We confirm the basics up front so the job runs safely, stays contained, and meets the scope you are booking.
Parts and surfaces confirmed before booking
Workshop controlled conditions for blasting work
Any masking or protected areas agreed in advance
Dust control and cleanup approach confirmed
Safe handling and storage of parts during the job
Clear sign off on the required finish before painting or refit
Share the parts, condition, and what they need to be ready for. We’ll confirm scope and book the job into the workshop.
No call-out fees across Perth’s northern suburbs — mobile service available.
Clear answers on scope, suitability, and what to expect from abrasive blasting in Perth.
Sandblasting is used to remove old coatings, corrosion, and stubborn buildup so a surface is ready for repair, welding, priming, or repainting.
Yes. This service is suited to heavy machinery components and commercial assets where coating removal and surface preparation matter.
Sandblasting is a common term for abrasive blasting. Abrasive blasting refers to blasting with an abrasive media to clean and prepare surfaces.
Yes. Rust and coating removal are common reasons for blasting. The final result depends on the material, condition, and the agreed finish level.
We focus on commercial assets and components. If you have trays, parts, mounts, or equipment related items, share the details and we’ll confirm suitability.
Blasting is completed in workshop controlled conditions in Malaga to better manage containment, cleanup, and finish consistency.
Pricing is based on part size, quantity, condition, and how much coating or corrosion needs to be removed, plus any masking or special handling required.
If repainting is required, we can scope the job so blasting and painting align. You can also view the industrial painting service page for details.
