- 0433 990 535
- info@distinctdetails.com.au
- 1/24 Exchange Rd, Malaga WA
Protect high-impact areas with a clear film designed to reduce stone chips, scuffs, and road wear while keeping the original look.
PPF is a clear urethane film applied over painted panels to help protect against stone chips, road debris, bug marks, and light scuffs. It is designed to keep your paint looking cleaner and newer for longer, without changing the colour or finish.
Coverage can be partial, full front, or full vehicle depending on how much protection you want.
PPF is designed for impact zones and high-wear areas. Here are the key points to know before you choose coverage.
PPF is built to help reduce chip damage from road debris, especially on the front end where impact is highest.
The film sits over your paint and keeps the factory look, while adding a protective layer you do not notice day to day.
Protect key areas like bumpers, bonnets, guards, mirrors and headlights, or step up to larger coverage depending on how you drive.
PPF is the right choice when your main goal is impact protection. If you drive on freeways, country roads, or around job sites, stone chips and scuffs build up fast, especially on the front end. PPF gives you a clear protective layer over the paint in the areas that take the most punishment, while keeping the factory look.
Not sure what coverage makes sense? Book online or call and we will guide you.
Perth roads and daily driving can be tough on paint, especially on the front end where stone chips and road grit hit first. Add strong heat and UV exposure, plus outdoor parking and regular washing, and the finish can mark up quickly without the right protection.
Freeways and road debris hammer the front end. PPF protects the impact zones first.
Perth heat and UV wear paint down. PPF adds a clear layer of defence.
Work vehicles get dirtier, more often. PPF helps prevent scuffs in high-wear areas.
PPF protects the panels that take the most impact, so your paint stays cleaner, sharper, and easier to live with.
Helps protect high-impact areas from road debris.
Reduces the marks that quickly build up on bumpers, bonnets, and guards.
Adds a layer of protection against day to day wear.
Clear film that does not change your paint colour.
Great for higher kilometres, job sites, and vehicles that see tougher conditions.
Helps maintain a sharper finish for longer, which can support resale appeal.
Every PPF booking includes the essentials to ensure clean fitment and a result that lasts:
Vehicle wash and surface clean before install
Decontamination of the panels being protected
PPF installation on the selected areas (partial, full front, or custom coverage)
Edge finishing and final inspection
Care guidance so you get the best life from the film
PPF pricing comes down to your vehicle size and shape, the coverage you choose (partial, full front, or custom), and the condition of the paint. More complex panels take more time and material, and if the paint needs refining first, we will recommend it so the film sits clean and the finish looks right.
Every service is backed by experience, quality products, and our satisfaction guarantee.
Simple steps, clean install, timing depends on coverage (usually 1 to 2 days).
Tell us your vehicle and what you want to protect. We confirm the best coverage and book you in.
We wash and prep the panels, then install the film with clean fitment and tidy edges.
We inspect the finish, then explain basic care and curing time so you get the best life from the film.
We install Paint Protection Film (PPF) from our Malaga base and service customers across Perth. If you are in the northern suburbs, you are close, and we make booking simple with clear timing and straight advice.
Popular areas we cover include Malaga, Balcatta, Osborne Park, Wangara, Bassendean, Morley, Midland, Ellenbrook, Wanneroo, and Joondalup, plus surrounding suburbs.
Not in the northern suburbs? Get in touch and we will confirm your options.
Avoid washing for the first 48 to 72 hours after installation so the film can settle properly.
Hand wash is best, using a gentle car shampoo and soft wash media. Avoid abrasive brushes or harsh scrubbing.
If you use a pressure washer, wait until the film has dried after install and do not aim high-pressure water directly at the edges.
Remove bugs and stains sooner rather than later to keep the film looking its best.
Most quality PPF is designed for long-term use and typically lasts around 5 to 10 years, depending on the film, exposure, and how the vehicle is maintained.
Warranty terms depend on the film brand, but premium films are commonly backed by a manufacturer warranty (often up to 10 years) covering defects like yellowing, staining, cracking, blistering, or delamination. We will confirm the exact warranty for your chosen film and help you through the process if a claim is ever needed.
Manufacturer references
Protect the high-impact areas and keep the factory finish looking cleaner for longer. Book online in minutes.
No call-out fees across Perth’s northern suburbs — mobile service available.
Straight answers to the most common questions about Paint Protection Film in Perth, including coverage, care, lifespan, and warranties.
PPF is a clear protective film applied over painted panels to help reduce stone chips, bug marks, and minor abrasions. It is also commonly called a clear bra.
PPF helps with stone chips, road rash, light scuffs, and everyday wear on high-impact areas. It will not make a car damage-proof, and heavy impacts can still mark the film or the panel underneath.
Most people start with high-impact zones like the front bumper, bonnet, guards, mirrors, and headlights. From there, coverage can be tailored to your driving, parking, and how much protection you want.
They solve different problems. PPF is best for impact protection like stone chips. Ceramic coating is best for easier washing, gloss, and chemical resistance. Many owners combine them by using PPF on impact zones and a coating for easier maintenance elsewhere.
Many modern films use a self-healing top coat that can help light marks disappear with warmth over time.
We recommend waiting about 72 hours before washing so the film can settle properly.
Hand washing is best. If you use a pressure washer, avoid directing high pressure at edges and seams because it can lift the film. Brush car washes can also scratch the film and tug on edges, so touchless is the safer option.
Longevity depends on exposure and care, but premium films are designed for long-term use and often come with manufacturer warranties. For example, XPEL lists defect coverage such as yellowing, staining, cracking, blistering, and delamination (with terms that can vary by product and region).
We’ll confirm the warranty terms for your chosen film at booking, and provide aftercare guidance at handover.
